Guifeng Mephisto Solo Mephisto Pure Class A Mono After-stage Pair
Reach out to the world
-Each unit provides 200 W (4 6 8 load), 400 W (4 6 8 load) and 800W (2 6 8 load) Pure Class A continuous output power
-Zero feedback fully balanced DC servo coupling amplifier circuit
-Each unit uses 40 high-current bipolar output power amplifier tubes and 1,000,000 microfarad huge capacitor array
-The internal wiring of the machine is selected from Denmark''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s Gryphon Audio, which is famous for its reputation, and the Guideline Reference reference signal line with pure gold filled with pure silver conductors
-There is no switch relay on the output
-Strictly selected pure copper bars as output coupling media
-Meticulously planned to help shorten the signal journey, the king grade fully sealed double-sided printed circuit board, and the castings of the power supply transformer are also decoupling treatment
-Two special 1,500W toroidal transformers equipped with anti-magnetic isolation function
-Digital and analog circuits each have an independent power supply group
-Neutrik XLR input terminals with gold-plated conductive contacts
-Patented large gold-plated speaker wire connection terminal
-Touch control backlit front baffle
-12V remote start trigger
-Fully automatic pure class A green or high/medium/low 3-stage manual bias setting
Specification introduction
Denmark Guifeng Gryphon Audio Mephisto Solo Pure Class A Mono After-stage Specifications:
Output power: 200 W (8 ohm load), 1,600 W (1 ohm load)
Peak output: 9,000 W (0.5 ohm load)
Signal-to-noise ratio (A-weighted): less than -83 dB
Dynamic range: 111 dB
Distortion rate (THD+N): less than 1% (180 W calculation), less than 0.06% (50 W calculation)
Input sensitivity: 1.13 V
Gain: 31 dB
Frequency response: 0– 400 kHz
Input impedance (balanced, 20–20 kHz): 10 k ohm
Output impedance (20–20 kHz): less than 0.013 ohm
Input terminal: XLR
Dimensions (H x W x D): 340 x 520 x 710 mm
Weight: 108 kg each